VERO EDGECAM 2016 R1 Build 6589



VERO EDGECAM 2016 R1 Build 6589 | 3.96 GB


Edgecam is a market leading computer aided manufacturing (CAM) system for NC part programming. With unparalleled ease of use and sophisticated toolpath generation, it?s the only CAM system you?ll need for milling, turning and mill-turn machining. Edgecam utilises your in house knowledge and experience to drive the CAM process with automation tools to suit different applications - allowing you to maintain your competitive edge.



New Features

EDGECAM Mill Turn
The uses of tail stocks, steadies, sub spindles, twin turrets along with C Axis, CY Axis and B Axis are regular features on today?s Multi-Task machine tools. In this collision rich environment, Edgecam?s turning and milling combinations provide a safe machining environment.

EDGECAM Production Milling
EDGECAM provides functionality to generate efficient toolpaths from wireframe and solid geometry on a variety of machine tool configurations, ranging from 2.5 axis to complex 3 to 5 axis milling machines.

EDGECAM Turning
EDGECAM Turning provides functionality for 2-Axis lathes, multi-turret configurations, sub-spindle turning centres and mill/turn machines. On a mill/turn machine, C-, Y- and B-Axis milling and drilling take place within the same environment, providing a fully integrated and associative programming solution.

EDGECAM 4 & 5 Axis
EDGECAM seamlessly integrates 4 and 5 axis simultaneous machining within its milling and mill/turn environment to allow a range of multiaxis cutting strategies to be applied to the most complex tooling or components.

EDGECAM 3D Milling
EDGECAM features an extensive suite of advanced 3D cycles that is ideally suited for the rapid generation of optimum toolpaths for all surface and solids machining needs.

EDGECAM Waveform
Waveform roughing is a high speed machining technique that maintains a constant tool cutting load by ensuring the tool engagement into the material is consistent. The tool path moves in a smooth path to avoid sharp changes in direction which maintains the machine tool?s velocity.

EDGECAM Solid Machinist
EDGECAM Solid Machinist is a powerful and seamlessly integrated CAM system for generating milling and turning machining strategies and NC code from solid models.

EDGECAM Wire EDM
EDGECAM?s Wire EDM is an efficient addition to its world class milling, turning, and turn/mill CAM software solution, providing greater productivity and increased flexibility through a single source solution provider.


Kod:

[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]
[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]
[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]
Kod:

http://alfafile.net/file/8u9S/VERO_EDGECAM_2016_R1_Build_6589.part1.rar
http://alfafile.net/file/8u93/VERO_EDGECAM_2016_R1_Build_6589.part2.rar
http://alfafile.net/file/8u9o/VERO_EDGECAM_2016_R1_Build_6589.part3.rar