Siemens Solid Edge 2019 MP09 (x64) Update | 409.1 mb
Siemens has released an update to latest release of Solid Edge software for mechanical and electrical design, simulation, manufacturing, technical documentation, and data management.

===API===
PR 9528866: Solid Edge aborts when trying to get a plane or PMI plane from annotation object
PR 9541960: Styles standard COM enumerator can crash solid edge
PR 9541992: Windows standard enumerator can crash Solid Edge

===General===
PR 9499888: Change SE status in Design Manager move files to the root folder in pre-release
PR 9511000: Wrong coordinate units with Probe command
PR 9503598: Update Status Info disabled with Solid Edge Foundation license
PR 9519306: A Total Bearing Load is being applied to each face with the total value.
PR 9542777: Common Views Window resizes when trying to move.

===Assembly===
PR 9324645: Unable to create chamfer assembly feature
PR 9362182: Unable to add Custom Occurrence Properties in some cases
PR 9426420: Assembly Move/Copy performance is slower compared to ST9
PR 9496664: Assembly that have features in them as being flagged as dirty on open
PR 9376294: Unable to run Piping Route utility (PreparePipingComponents.exe)
PR 9519529: Changing triad angle with Drag component command not working if angle typed in.
PR 9533162: Part geometry is wrong when zooming in and out
PR 9495996: Assembly: Editing sketch profile twice causes the document to go in error state

===Draft===
PR 9427462: Legacy parts list resets (turns on all) components in Options.
PR 9502972: Hidden callouts are not being located
PR 9498819: Changing "Terminator Type" will change at wrong end
PR 9524795: Crash placing view of AP asm after selecting FOA.

===Part/Profile/Sheet Metal===
PR 9520457: Potential fix for a crashlog abort in the Sync interpart copy command
PR 9529624: Smart dimension with dimension axis is not driving.
PR 9518257: Under 'round' the blend command does not work in Shining 3D
PR 9530464: contour flange built with ST10 (or prior) fails when recomputed with 2019
PR 9531196: Crash doing move to sync on this part file.
PR 9537499: Access violation (trapped) when closing the FOP preview window

===Translators===
PR 9487491: Crash while executing a 'Recompute' on a 'Part Copy' feature
PR 8732052: SW DATA MIGRATION wrong results
PR 9474274: SW2014 After the migration of the drawings are not the same

===Teamcenter Integration for Solid Edge===
PR 9437078: Line of the L-Panel is updated incorrectly by executing Set "Save As Selected"
PR 9468700: Property of a part can only be updated once within an assembly
PR 9511650: Check - In and Revise of any 3D is failed when unexpected lines exist in MyHistory
PR 9512949: SEEC: props and .xml files not copied to Cache, "Object" displayed in Pathfinder
PR 9521479: "Auto Fit" always on by default
PR 9521797: Query that takes a long time to execute is performed by SESE operation
PR 8422144: SEEC Occurrence properties will not sync with TC find no for all FOA member
PR 9504722: CAM Express (NX12) is unable to open Solid Edge ST9 parts in TC 11.4.
PR 9418335: Overwriting another users work
PR 9498295: Script error during Check-In from Hosted AW
PR 9507704: User cannot change default UOM value on CPD.

===Mold Tooling===
PR 9288728: Crash while exiting SE after closing mold and electrode project with "Close All"

===TechPub===
PR 9344042: First time Save as of an assembly to QSM File cause components are incorrect
PR 9134662: Assembly display mode and zoom changes after export to QSM / Illustrations.

Solid Edge is a complete 3D CAD system that uses Siemens Synchronous Technology for accelerated design, faster revisions, and better imported re-use that helps companies design smarter. When it comes to 3D design, Solid Edge is your best choice for accelerating design, getting products to market quicker, speeding ECO execution, and maximizing your re-use of imported 2D and 3D data.

Solid Edge 2019 adds electrical and printed circuit board (PCB) design technologies, new requirements management capabilities, integrated simulation analysis, the latest tools for subtractive and additive manufacturing, and free secure cloud-based project collaboration.

Solid Edge Wiring Design provides design and simulation tools for the creation of wiring diagrams and verification of electrical systems. Solid Edge Harness Design adds harness and formboard design tools with automated part selection, design validation, and manufacturing report generation. Solid Edge PCB Design accelerates schematic capture and PCB layout, and is fully integrated with mechanical design to reduce costly errors, according to the company.

New design for additive manufacturing capabilities include better control of shapes, weight and strength, and specific factors of safety to enable customers to develop new designs never before possible. Solid Edge also automates print preparation, including multi-color, multi-material printing capability, which reduces bill of material size and parts inventory and decreases dependency on costly manufacturing equipment. Also new in Solid Edge 2019 is Solid Edge CAM Pro, which can be used to efficiently program CNC machine tools helping confirm parts are manufactured as designed.

This Lunchbyte video covers some of the general application changes in Solid Edge 2019. It also covers enhancements to generative design, reverse engineering, intersect, mesh modeling, design for cost, the assembly environment, and more.

Siemens PLM Software. is a world-leading provider of product lifecycle management and manufacturing operations management software. We help thousands of companies realize innovation by optimizing their processes, from planning and development through manufacturing, production and support.

Product: Siemens Solid Edge
Version: 2019 MP09 build 219.00.09.00 Update
Supported Architectures: x64
Website Home Page :
Kod:
http://www.plm.automation.siemens.com
Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: Siemens Solid Edge 2019 and Siemens Solid Edge 2019 Technical Publications
Size: 409.1 mb

Solid Edge 2019 System Requirements

Solid Edge 2019 has been certified to run on the following:
- Windows 10 Enterprise or Professional (64-bit only) version 1709 or later
- Internet Explorer 11. Internet Explorer is not required to be the default browser. Solid Edge does not support the Windows 10 browser, Microsoft Edge.
- Microsoft Office Professional 2013, Microsoft Office Professional 2016, or Microsoft Office 365. Solid Edge ST9 was the last release to support Office 2010.
- Solid Edge 2019 is 64-bit only. Solid Edge ST6 was the last release of 32-bit Solid Edge.
- Solid Edge 2019 is the last release to install on Windows 7 or Windows 8.1.
Minimum system configuration
- Any one of the following operating systems:
Windows 10 Enterprise or Professional (64-bit only) version 1709 or later
Windows 8.1 Pro or Enterprise (64-bit only)
Windows 7 Enterprise, Ultimate, or Professional (64-bit only) with Service Pack 1
- 4 GB RAM or more
- 65K Colors
- Screen Resolution: 1280 x 1024 or higher
- 6.5 GB of disk space required for installation

Download link:
Kod:
rapidgator_net:
https://rapidgator.net/file/c2069965bb7caf09cebebd71c4d02fd3/lxm5b.Siemens.Solid.Edge.2019.MP09.Update.rar.html

nitroflare_com:
http://nitroflare.com/view/0D1A86835CD43F9/lxm5b.Siemens.Solid.Edge.2019.MP09.Update.rar
Links are Interchangeable - No Password - Single Extraction