Siemens Simcenter FloEFD 2019.3.0 v4745



Siemens Simcenter FloEFD 2019.3.0 v4745 | 678.1 mb
Language: English, Deutsch, Fran�ais, ??, ???, ???????


Mentor, a Siemens business, is pleased to announce the availability of FloEFD is a powerful computational fluid dynamics (CFD) analysis tool that is embedded into Siemens NX. This solution enables design engineers to frontload CFD by moving simulation early into the design process where it is more cost effective to identify and fix problems and enhance productivity by x2 to x40.
]Release Simcenter FloEFD Version 2019.3

List of new features;
PDML Import. PDML is originally FloTHERM format which is often used by IC vendors to supply users with IC package simulation model. An IC package definition in *.pdml format can now be imported into FloEFD (requires EDA Bridge license). PDML format contains information about geometry, sources and material properties. The following information can be imported:
EDA Bridge. PCB can now be imported into an existing project. EDA Bridge adds PCB to a separate component which is added into main assembly and PCB definition is added as condition linked from this component (Add from Component). You can easily copy imported PCB to the same project with right-mouse click on PCB component folder in the From Component tree.
Parameters. Project Parameters can now be dependent on goals, time, iterations and travels as a function or table. You can create complex table and formula dependent boundary conditions.
Equation goal. Equation goal can now depend on CAD parameter.
Phase change for all real gases. Phase change is now available for all real gases not only refrigerants.
Averaging in steady-state. Visualized Parameters can now be averaged over user-defined interval of iterations in a steady-state analysis. If you enable averaging, additional parameters appear in the list.
Trajectory speed-up. The "Pattern on Shapes" type now displays trajectories immediately after definition. A new "Sphere" shape provides easier definition of starting points.
Description Min Max auto scaling. A Description's minimum and maximum values can be updated automatically when results are changed. The Description Min Max buttons work as toggle and update Description Min Max until they are reset.
FLOEFD View. A few enhancements in FloEFD free results viewer:
- "Normal to Description" view is added for cut Descriptions.
- Section can now crop Descriptions (Apply to Descriptions option) not only the geometry.
- Rotating now rotates around the centre of the view.
Save As. Added selection of View mode (Wireframe, Shaded, Shaded with Edges).
Results summary. Added turbulence parameters into results summary.
Ray Description. Ray Description is available for definition before calculation and can be processed with Batch Results Processing.
Surface parameters. Offset option is added to Surface parameters.
Point goals. When added points by coordinates you can set the name of the goal.
Remote data management improved. After finishing calculation results from the calculation server are automatically copied to the client computer even if CAD was closed.
Remote calculation with Windows HPC Pack 2016 scheduler. You can now pass various arguments to the scheduler (no need administrative privileges): template, priority, nodes and node groups, hold time.
NX 13 Support. Support of Siemens NX 1847 and 1872 Series.
Customize Licenses Feature. Customize Features now lists modules rather than atomic license features. System administrators can now customize the license choice for multiple users using the CustomizeFeatures.exe routine. For details, refer to the "Selecting License Features to Use" in the Installation Guide.
MLS update. This version supports Mentor Standard Licensing (MSL) version 2019_3 which uses FlexNet� 11.16.4. This may require updating the license server.
Problems Fixed in This Release
dts0101386748 Crash at preparing stagein solver for the task with specified Membrane and switched off "Heat conduction in solids"option
dts0101342374 Periodic mesh isn't generated [model specific]
dts0101339484 Long time per iteration in case of perforated plate is specified in the task comparing to the case without perforated plate
dts0101382204 Misinterpreting names of Inlet and Outlet fans in Japanese version
dts0101301814 Too big total temperature variation in turbulent mixing layer for high Mach number solvercomparing to low compressible solver
dts0101186578 Descriptionmaximum value definition in CutDescription is not recognized in the clonedproject and old max value from original project is shown
FloEFD for Siemens NX is a powerful computational fluid dynamics (CFD) analysis tool that is embedded into Siemens NX. It enables design engineers to frontload CFD by moving simulation early into the design process where it is more cost effective to identify and fix problems.
Extend the power of Siemens NX to optimize product performance and reliability for fluid flow and heat transfer effects. With its unique combination of intuitive interface, and fast as well as accurate technology, Simcenter FLOEFD for NX can be inserted into your current design process without any disruption, streamlining your workflow and improving productivity by 40x.
The award-winning Simcenter FLOEFD for NX frontloads computational fluid dynamics (CFD) simulation where it is faster and more cost-effective to evaluate your ideas. Gain insight into the real-life behavior of a wide range of fluids in even the most complex geometries. Evaluate the digital twin with the help of what-if testing and assess the results with the help of numerical values, graphs, images and animations. Use the power of Simcenter FLOEFD for NX with its direct interface to HEEDS Design Space Exploration software to select the most optimal choice.
When needed, Simcenter FLOEFD Flexx, enables you to access multiple CAD systems for simulation - useful for dealing with legacy data or using multiple CAD systems on the same project. With Simcenter FLOEFD for NX the power of CFD simulation is finally in your hands
NX FloEFD is for CAD designer who are looking for Frontloading and accurate CFD analysis. 'Frontloading' refers to the practice of moving CFD simulation early into the design process where it can help engineers examine trends and eliminate less desirable options, as well as reduce overall simulation workflow time by as much as 75%.


Siemens PLM Software. a business unit of the Siemens Digital Factory Division, is a leading global provider of product lifecycle management (PLM) and manufacturing operations management (MOM) software, systems and services with over 15 million licensed seats and more than 140,000 customers worldwide. Headquartered in Plano, Texas, Siemens PLM Software works collaboratively with its customers to provide industry software solutions that help companies everywhere achieve a sustainable competitive advantage by making real the innovations that matter.
Mentor, a Siemens Business, is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronic, semiconductor and systems companies. We enable companies to develop better electronic products faster and more cost-effectively. Our innovative products help conquer complex design challenges. Mentor is technology leader in full chip emulation, Functional Verification, Design-for-Test and physical verification with its Veloce, Questa, Tessent and Calibre platforms.
Product: Siemens Simcenter FloEFD
Version: 2019.3.0 v4745
Supported Architectures: x64
Website Home Page :
[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]

Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: Siemens NX 1847 and 1872 Series
Size: 678.1 mb


Minimum Operating Systems
- Microsoft Windows 10 (64-bit) Pro and Enterprise editions
Windows 10
Windows 10 is the minimum supported release for NX 1867. The supported versions of Windows 10 are the Professional and Enterprise editions utilizing either the Current Branch for Business (CBB) or Long Term Service Branch (LTSB) update branch. The Current Branch (CB) update option is not supported. Windows 10 is also available for NX 10.0.3 and later versions including NX 1867. Any caveats or special instructions are provided in the SFB announcing support.
Windows 7 and 8.1
Windows 7 has reached the end of life and mainstream support has ended. Windows 8.1 is still supported by Microsoft, but was rarely deployed. These two versions of Windows are no longer supported by NX 1867. Siemens PLM Software has not performed testing on these versions and cannot resolve any issues related to NX 1867 running on these operating systems.
Windows XP and Vista
Windows XP support from Microsoft has ended and Vista was rarely deployed so these two versions of Windows are not supported by NX 1867. Siemens PLM Software has not performed testing on these versions and cannot resolve any issues related to NX 1867 running on these operating systems.
Recommended System Configuration:
- 64-bit Windows 10 operating system
- 4 GB RAM minimum, 8 GB or 16 GB RAM recommended
- True Color (32-bit) or 16 million colors (24-bit)
- Screen Resolution: 1280 x 1024 or higher, widescreen format




DOWNLOAD LINKS :

Kod:
https://rapidgator.net/file/6dbdeb2dca1bc81b6ef4cc4656832c9f/07m6m.Siemens.Simcenter.FloEFD.2019.3.0.v4745.rar.html

https://uploadgig.com/file/download/6Deb642304B97e1c/07m6m.Siemens.Simcenter.FloEFD.2019.3.0.v4745.rar

https://nitroflare.com/view/3F370AAE5BD0A81/07m6m.Siemens.Simcenter.FloEFD.2019.3.0.v4745.rar

http://uploaded.net/file/gnivf0l7/07m6m.Siemens.Simcenter.FloEFD.2019.3.0.v4745.rar