Autodesk Inventor HSM 2018.2 (R3) Build 5.3.1.55 | 385.3 mb
Autodesk Inc., a world leader in 3D design software for entertainment, natural resources, manufacturing, engineering, construction, and civil infrastructure, has released Inventor HSM 2018.2 (R3) Build 5.3.1.55, is an integrated 2.5- to 5-axis CAD/CAM programming solution for Inventor.

Build 5.3.1.54 / 2 October 2017

This release contains a number of important fixes and improvements, as identified below.

Add "approach mode" parameter for 2d Contour. #6078
Add "Curve in Radius" parameter as an advanced setting for Adaptive Clearing. #8251
Added 'Stock back' as option for chuck position mode. #8280
Add Fixture Attachment selection to Setup for use by 3rd party software. #7937
Improved tool information for HTML setup sheet. #8098
Added 'Chuck Front' as possible reference for secondary spindle operations. #8160
Use new parametric confinement for Turning Part and Face. #8079
Added "Only Same Hole Depth" and "Only Same Z Top Height" to Drill when using "Select Same Diameter". #8030
Added "Keep Original" option to Duplication and Component pattern. #8073
Only automatically select Setup Model bodies if there are few. #8140
Rename "WCS Probe" strategy to "Probe". #7909
Add Renishaw Probes library to sample libraries. #8302
Changed default rounding for relative size cylindrical stock to 0. #7739
Set the focus of the Compare and Edit dialog to be the text filter on launch. #7908
Avoid showing Blend in "Create Derived Operation" submenu if not enabled by license. #8461
Fixed wrong toolpath issue for Turning Profile. #8219
Fixed potential break and retract for Adaptive Clearing when using entry positions. #8248
Fixed wrong linking issue for Turning Profile. #8253
Fixed potential failure for Turning Profile. #8267
Fixed issue with importing from TSV files. #8375
Fixed potentially missing model image for Excel 2007 Setup Sheet. #8351
Remove Delete command from context menu of browser item sub-nodes (toolpath, WCS, tool). #1229
Fixed issue where 2D contour using Dovetail could gouge the model. #8232
Fix incorrect toolpath in 2D Contour when using the Do Chamfer parameter. #8207
Selection button not auto-activated after make a previous selection. #3354
Fix cases where CAM browser doesn't get updated properly when working with opened assembly component. #8081
Avoid license dialog when upgrading from previous version. #8090
Fixed crash trying to show preview on certain models. #8072
Fixed issue in 2D Chamfer where no vertical lead out radius was produced when "Same as lead in" is checked. #8041
Activate selection control when choosing "Selection" on heights tab. #3614
Hide Stock to Leave parameter for Turning Chamfer. #1465

Changes in Toolpath Generation

Added support for merging multiple contours when they are touching for turning. #6156
Improved support for predrilling for 2D Contour to support cases where tool size is very close to the pocket being machining. #7675
Changed turning to return error when multiple disjoint contours are provided. #6156
Improved retract linking for Turning Profile. #7498
Improved toolpath quality near rotary axis for Turning Profile. #7545
Fixed wrong retract issue for Turning Profile. #8253
Fixed wrong toolpath coordinate issue for Turning Profile. #8219
Fixed wrong retract issue for Turning Profile. #8198
Changed movement to using predrilling feed for Adaptive Clearing when using the predrill feature. #7743
Fixed issue when Adaptive Clearing would get stuck during calculation. #7327
Fixed potential failure for Turning Grooving. #7844
Fixed potential failure for Adaptive Clearing. #6587
Fixed issue with leads not remaining in fixed orientation when cutting at an angle for Turning Profile. #7782
Fixed retract exceeding clearance for Turning Profile. #7837
Fixed potential failure during staydown for Adaptive Clearing. #7825
Fixed potential failure for Adaptive Clearing. #7294

Changes to post processor:

Added API PostProcessor.registerTerminationHandler() to register functions to be called at end of processing.
Added API for multi-axis singularity settings. See MachineConfiguration.setSingularity() for details.
Fixed support for Unicode for ZipFile API. #7021
Fixed issue where toolpath information was not available during onTerminate().

Changes to post library:

Added Siemens 840D with subprograms post.
Added ACU-RITE MILLPWR G2 post.
Added support for product and holder links for HTML Tool Sheet.
Added Kern laser post.
Added new property 'useTCPC' to switch between TCP and no-TCP for HAAS Next Generation posts.
Added support for accumulated depth for the G73 canned cycle for HAAS mill posts.
Detect and present product ID for tool and holder as link for HTML setup sheet.
Improved CAMplete post for better support of installed CAMplete.
Added DMS router FAGOR 8055 & 8065 posts.
Added property 'writeComments' to enable/disable comments for Maho 432 post.
Added CNC Router Parts Mach3 plasma post.
Added post for Maho Philips 432.
Added Mach3 waterjet and plasma posts.
Updated support for G112/XZC machining for HAAS mill-turn posts.
Added ProtoTRAK turning post.
Added G48 support for CSS mode for Mach3 turning post.
Added support for switching to mm/s using property 'useUnitPerSecondFeedrates' for WinPC-NC. The default is mm/min. This feature is only supported for metric mode.
Added support for turning off rigid tapping using property 'useRigidTapping' for Fadal post. Rigid tapping is enabled by default.
Added support for laser cutting for UCCNC post.
Added property 'abrasiveFlow' for Hydren waterjet post.
Updated properties for specifying the machine model for Roland RML post.
Updated properties for specifying the fourth axis for UCCNC posts.
Updated properties for specifying the fourth axis for WinPC-NC posts.
Added properties to tell which rotaries are available to avoid G28 retracts when not desired for HAAS Next Generation posts.
Updated when to use the chip breaking and deep drilling canned cycles for Anilam ISO post.
Don't show number of flutes if 0 for HTML Setup Sheet.
Updated MultiCam HPGL post to only accept 3-axis toolpath.
Ignore work offset for Roland post.
Updated MultiCam ISO post to only accept 3-axis toolpath.
Updated FlexiCAM post to only accept 3-axis toolpath.
Updated documentation for properties for posts.
Added failure when not using machine rotaries for multi-axis simultaneous toolpath for posts.
Updated documentation for properties for posts.
Adjusted encoder reset at rewinds for HAAS UMC-750 post.
Adjusted rewind handling for HAAS with trunnion post.
Updated support for floating tab holder for Andronic post.
Changed description for HTML Setup Sheet.
Updated retract handling for Heidenhain posts.
Simplified implementation of Flow post.
Renamed property 'rigidTapping' to 'useRigidTapping' for Heidenhain posts.
Changed defaults for properties and added support for enabling/disabling multi-axis for CR Onsrud router post.
Major update of ISEL post.
Updated tool info for HTML Setup Sheet and enabled tool list by default.
Updated description for HAAS milling posts to include '(pre-NGC)' to indicate that posts are for the pre-Next Generation Control.
Updated multi-axis support for Pocket NC, 5AXISMAKER, and HAAS posts.
Updated inverse time support for HAAS posts.
Updated inverse time support for Tormach PathPilot, Pocket NC, 5AXISMAKER, and Fadal posts.
Updated inverse time support for Fanuc with A-axis post.
Fixed wrong rotation for 5-axis indexing when tool axis is perpendicular to the slave table for Pocket NC.
Fixed canned cycles output for Anilam ISO post.
Use 6 decimals for to multi-axis vectors when no machine is defined for Siemens 840 posts.
Fixed G18 issue for polar interpolation mode for Doosan mill-turn post.
Fixed naming for property 'spindleSpeedInRPM' for Roland RML post.
Fixed potential failure for Heidenhain 407 post.
Fixed issue with failure for HAAS mill-turn posts.
Fixed missing axis limit for PLANE SPATIAL for Heidenhain and Heidenhain 426 posts.
Fixed missing spindle and coolant on command for rewind situations for HAAS mill-turn posts.
Fixed potentially missing model picture issue for Excel 2007 Setup Sheet.
Fixed wrong initial position issue for Brother post.
Fixed C-axis positioning for axial center drilling for HAAS mill-turn posts.
Fixed multi-axis support for Doosan mill-turn post.
Fixed issue with out of range C-axis for XZC milling for HAAS lathe posts.
Fixed G43.4 for Doosan VMC Fanuc post.
Fixed multi-axis indexing issue for HAAS posts.
Fixed unsupported G90/G91 for Mach4 turning post.
Fixed support for property 'useZ' at cycles for Torchmate post.
Fixed wrong syntax for cycles for XML post.
Fixed power-off support for nozzle down moves for Flow post.
Fixed tangency validation for Thermwood post.
Fixed missing EOT at program end for Maho 432 post.
Fixed slow positioning moves for canned cycles for Fadal post.
Fixed circular moves in ZX plane for ISEL post.
Fixed missing G43.4 TCP output for Fanuc posts.
Fixed subprogram issues for Heidenhain post.
Fixed missing length offset for Siemens 802D/810D posts. Note that length offset is always set to D1.
Fixed backwards compatibility issue for HAAS mill-turn posts.
Fixed G94 output for Fanuc with A-axis post.
Fixed position issue for subprogram for Fanuc post.
Fixed missing D-word with G41/G42 for Hydren Systems waterjet post.
Fixed missing output of main/sub spindle for axial center drilling for Mazak Integrex post.
Fixed issue for CSS mode for Siemens mill-turn post.
Fixed coolant handling for Tormach post.
Updated smoothing and fixed multi-axis support for Onsrud post.
Fixed turning output after drilling for Doosan mill-turn post.
Fixed inverse time support for Mach mill posts.
Disabled G2/G3 since unsupported for Carvey.

About Autodesk Inventor HSM. Autodesk HSM 2018 software bundle provides the best value in integrated CAM software available. Included are HSM add-ons for SOLIDWORKS and Autodesk Inventor. Integrated CAM helps CNC programmers, designers, and engineers rapidly produce machined parts in one seamless workflow, while maintaining model associativity for quick updates to part changes. Whether you are working with multiple CAD formats or starting from pencil sketches, Integrated CAM with your design software is the simplest and fastest way to machine your parts.

Take advantage of the best-in-class toolpath strategies for 2.5D, 3D and 3+2 milling applications. Inventor HSM software not only provides all the conventional machining strategies, but it also generates smooth linking moves that reduce machining time and increase machine and tool life.

About Autodesk. Autodesk helps people imagine, design and create a better world. Everyone-from design professionals, engineers and architects to digital artists, students and hobbyists-uses Autodesk software to unlock their creativity and solve important challenges.

Product: Autodesk Inventor HSM
Version: 2018.2 (R3) Build 5.3.1.55
Supported Architectures: x64
Website Home Page :
[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]
Language: multilanguage
System Requirements: PC
Supported Operating Systems: The same OS and hardware requirements for the version of software that you are using.
Software Prerequisites: compatible with the 2016 or newer versions of Inventor Professional or Inventor LT.
Size: 385.3 mb

Download link:




uploadgig_com:
[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]

uploaded_net:
[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]
Links are Interchangeable - No Password - Single Extraction