InventorCAM 2019 SP2 HF8 Multilang for Autodesk Inventor 2018-2020 x64
InventorCAM 2019 SP2 HF8 Multilang for Autodesk Inventor 2018-2020 x64
[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]
InventorCAM 2019 SP2 HF8 Multilang for Autodesk Inventor 2018-2020 x64 | 3.75 GB
InventorCAM - CAD / CAM system developed by a new generation of Israeli firm SolidCAM Ltd (official distributor in Russia - Consistent Software). This system is a complete solution for the automation of the production of metal. Using a wide range of proposed strategies InventorCAM turning, milling, turning, milling and electrical discharge machining process engineer can in a short time to prepare the necessary set of control programs for machining products.
Functionality InventorCAM
Support for 64bit computing by having a special version for 64bit
2.5-axis milling
InventorCAM provides high efficiency and accuracy 2,5-axis milling parts. Supports different strategies for handling items such as contour, sampling (including islands) and the groove as well as various types of hole machining: drilling, reaming, threading, etc. The system has a wide range of possibilities 2,5-axis machining of analytic surfaces..
3-axis milling
InventorCAM provides a wide range of tools that can be effectively used for the treatment of articles with complex geometries (dies, molds) and prismatic parts. As the geometry for 3-axis machining using a three-dimensional solid model or surface. System supports a variety of strategies for roughing and finishing, such as raster processing with a predetermined or automatically determined by the raster angle of equidistant, projection processing, handling at the waterline, etc.
In addition to the listed capacity 2,5 and 3-axis machining, InventorCAM provides tools to identify and refine areas not treated in previous transitions. You can create a database of standard processes. Once created, a parameterized process can be reused in the future, which significantly reduces the time of preparation of production, enhances the reliability of the developed programs, unifies the style of technological development, ensures that only the best processing technology and ensures the independence of the human factor. Lack zarezany guaranteed by the presence of means of control and visualization of machining.
Multi-processing
InventorCAM offers various tools for creating control programs of the multi-processing on 4- and 5-axis machining centers. The model is set in a user-plane processing, after which the system automatically calculates all necessary parameters for the displacement and rotation of zero items. As a result, significantly reduces set-up time of transition and increases accuracy.
Lathes and milling
InventorCAM has lots of features to automate the creation of control programs for turning and turning and milling. InventorCAM supports different types of tools that can effectively perform longitudinal turning, facing, grooving and others. In addition InventorCAM automatically perform roughing and finishing of complex contours. Support rotating tool allows you to perform milling and drilling transitions to processing centers.
Electrical discharge machining
The proposed set of strategies InventorCAM Wire EDM allows processing of external and internal contours of constant and variable angle. The possibility of 4-axis machining. A special algorithm prevents fall of the treated material. InventorCAM provides user controls physical processing parameters on the entire trajectory of the wire.
ATTENTION! Users Delcam PowerMILL 2015-2016 under Multikey emulator key!
Version Multikey Emulator 18.1.0 64-bit in this release is not compatible with Delcam PowerMILL 2015-2016!
The decision to install and SolidCAM and PowerMILL on a single computer under Multikey There is a distribution PowerMILL 2016- but there lined version of the emulator requires the mandatory Windows boot in a test mode, which is not required with the version of the emulator from the hand
picGod / Release Date: 2020
Version 2019 SP2 HF8 build 105834
Developer: SolidCAM Ltd
Developer website: [Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]
Bit depth: 64bit
Language: Multilingual (Russian present)
Chinese Simplified, Chinese Traditional, Czech, Danish, Dutch, English, French, German, Hebrew, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Turkish
Medicine: Present (TeAM SolidSQUAD-SSQ)
System requirements:
preset Autodesk Inventor 2020 (and below) 64bit only
DOWNLOAD LINKS :
Kod:
https://rapidgator.net/file/d87fbdbff7ac687ce8cec61ea3f3a816/InventorCAM.2019.SP2.HF8.Win64-SSQ.part1.rar.html
https://rapidgator.net/file/6ce4ba8ed17b6f2101874a5ceba91569/InventorCAM.2019.SP2.HF8.Win64-SSQ.part2.rar.html
https://rapidgator.net/file/7e676ee4bbfaa67dd1a74d8e1ef886c5/InventorCAM.2019.SP2.HF8.Win64-SSQ.part3.rar.html
https://rapidgator.net/file/73699295bbad02a74eb3eaca01afc674/InventorCAM.2019.SP2.HF8.Win64-SSQ.part4.rar.html
https://nitroflare.com/view/7A75DBB9D0B1D97/InventorCAM.2019.SP2.HF8.Win64-SSQ.part1.rar
https://nitroflare.com/view/EF6B9F0EB2DEA6E/InventorCAM.2019.SP2.HF8.Win64-SSQ.part2.rar
https://nitroflare.com/view/8D67EF63C4D03BF/InventorCAM.2019.SP2.HF8.Win64-SSQ.part3.rar
https://nitroflare.com/view/72495B4A4854878/InventorCAM.2019.SP2.HF8.Win64-SSQ.part4.rar
