Cadence SPB Allegro and OrCAD v17.20.052
Cadence SPB Allegro and OrCAD v17.20.052
[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]
Cadence SPB Allegro and OrCAD v17.20.052
x64 | File Size: 3.61 GB
Description:
OrCAD one of the best and most professional software simulation and analysis electronic circuits and electronic design automation software division (Electronic Design Automation or abbreviated EDA) is.
OrCAD consists of two words that in fact the state of Oregon was the birthplace of early versions of the software and CAD stands for Computer-aided design and computer design means is formed. Cadence SPB OrCAD OrCAD PCB set to Allegro PCB or also known, including various programs to design schematic, simulation and analysis of electronic is circuits.
Facilities and software features of Cadence SPB OrCAD:
-suitable graphical user environments and display circuit using icons
-OrCAD Capture and Capture CIS schematic design circuits in powerful environment
-Ability to design PCB (Printed Circuit Board stands and means the board or PCB)
-has an extensive library full of components and electronic devices
-Advanced simulation and analysis electronic circuits in a graphical environment PSpice
-environment Orcad PCB Designer / Editor to design and edit PCB
-Ability to interact with MATLAB and Simulink software
System Requirements:
Cadence Allegro and OrCAD 17.2-2016 Hardware and Software Requirements:
This section describes the system requirements for Windows.
Cadence Allegro and OrCAD products are integrated directly with Windows;
the products support hardware and peripherals supported by Windows. A list of
hardware and peripherals officially supported by Windows can be obtained from the Microsoft web page.
The products require updating certain Microsoft libraries in the Windows directory.
You must install the Cadence software using either a standalone install or a client install.
You may not be able to point to the software without installing.
Operating System:
Microsoft� Windows� 7 Professional, Enterprise, Ultimate or Home Premium
(64-bit); Windows 8 (64-bit) (All Service Packs); Windows 10 (64-bit); Windows 2008 R2 Server; Windows 2012 Server (All Service Packs).
Note: Cadence Allegro and OrCAD (Including EDM) products do not support
Windows 7 Starter and Home Basic. In addition, Windows Server support does not
include support for Windows Remote Desktop. Windows RT and Tablets are not supported.
Recommended Software"
-Microsoft� Internet Explorer� 11.0 or later
Minimum Hardware:
-Intel� Pentium� 4 or AMD Athlon XP 2000 with multi-core CPU
-Ram:8 GB RAM
-Virtual memory at least twice physical memory
-50 GB free disk space
-1,024 x 768 display resolution with true color (16-bit color)
-Broadband Internet connection for some service
-Ethernet card (for network communications and security hostID)
-Three-button Microsoft-compatible mouse
Recommended Hardware:
-Intel� Core� 2 Duo 2.66 GHz or AMD Athlon 64 X2 5200+
-Note: Faster processors are preferred.
-RAM:8 GB RAM
-Disk:500 GB free disk space
-Display:1,280 x 1024 display resolution with true color (at least 32bit color)
-GPU:A dedicated graphics card
-Display:Dual monitorsInstallation Guide:Version 17.2:
Remove the previous version and install the Cadence License Manager 12.06 and the show-license request file, close it. Then the program with the default settings, install it.
Now LicenseManager folder in the folder Crack in the installation program (by default C: \ Cadence)
copy and file it with the Run as administrator LicenseManagerPubKey.bat on the run. Tools folder in
the path C: \ Cadence \ SPB_17.2 copy and run the file and wait for the operation to be performed ToolsPubKey.bat.
LicenseServerConfiguration.exe file to the path C: \ Cadence \ LicenseManager Run as administrator
to run the License.lic files in the folder, enter the crack and without changing
the Double-click Next and then Finish. A new license in the path C: \ Cadence \ LicenseManager
named license.dat is produced, it will run Notepad with only two lines after the DAEMON
cdslmd (including address and port is cdslmd.exe file) and delete the file save.
Finally lmtools.exe file to run the same route and in the tab Start / Stop / Reread first on Stop Server and then click Start Server or ReRead License File again.
! Installing the update cause failure of fluff and not a result of the program and should be done before installing the following:
To install the program and folder names SPB_17.2 change; for example SPB_17.2
The new folder name and file SPB_17.2 SPB_17.2 compnts.dat in the folder in which to
copy. Now update the default path is the folder SPB_17.2 install.
After the installation, the folder and the folder Crack Crack, tools folder in the folder
SPB_17.2 copy and then run the file ToolsPubKey.bat. After the closure of the
window operation, all the files and folders
in the folder to the folder SPB_17.2 SPB_17.2 move. The folder name in the form
of the previous SPB_17.2 SPB_17.2 back
Note:apply Hotfix before apply patch the files (Use Cadence SPB OrCAD 17.2-2016 Crack Fixed from hotfix folder for crack.
Whats New:Fixed CCRs: SPB 17.2 HotFix 052
13-01-2019
2020429 ADW ADWSERVER Incorrect adwservice status on Linux
2034815 ADW LIBDISTRIBUTI Cannot mark classification obsolete because it is associated to objects in the database
2015461 ADWPART_BROWSER New Component Browser should read the mapping of symbol and associated package as it results in error PKG-1005
2049380 ADW PART_BROWSER System Capture Import HDL not importing complete PTF File data
1948608 ADW TDA CUSTOMVAR directive value in project CPM was not updated by TDA UPDATE command.
1992662 ADW TDA Custom directive added to the cpm file not updated after check-in
1733129 ALLEGRO_EDITOR COLOR 'Display - Highlight', double-click permanently highlights symbol
1861938 ALLEGRO_EDITOR COLOR Changing layer color changes layer visibility
2034753 ALLEGRO_EDITOR CROSS_SECTION Allegro PCB Editor crashes when a cross-section technology file is imported in Overwrite mode
2036895 ALLEGRO_EDITOR CROSS_SECTION Replay script error during import of tcfx Xsection file
1929360 ALLEGRO_EDITOR DATABASE Via color is inconsistent on Vias with color assigned
1984203 ALLEGRO_EDITOR DATABASE Drill holes not displayed correctly in the Zone area
2013596 ALLEGRO_EDITOR DATABASE Assigning net name on Vias does not change the Via Color to that on Net Color automatically
2025798 ALLEGRO_EDITOR DATABASE Assign net to via changes color of the via to the default color
2032678 ALLEGRO_EDITOR DATABASE Unable to delete layer on design
2032725 ALLEGRO_EDITOR DATABASE Dehighlight removes color assignment from color dialog
2029542 ALLEGRO_EDITOR DFA Interactive Placement with Manufacturing Package to Package spacing
2020548 ALLEGRO_EDITOR DFM Cadence DFM Customer site cannot Submit Request
2020566 ALLEGRO_EDITOR DFM Error when sending Design True DFM Rules Request
2030179 ALLEGRO_EDITOR DFM Allegro PCB Editor .brd file will not save after routing using Automatic Router
2052907 ALLEGRO_EDITOR DFM The Submit Request button for DesignTrue DFM Rules Request does not work
1928915 ALLEGRO_EDITOR EDIT_ETCH PCB Editor constraint status bar does not match Constraint Manager data when z-axis delay is turned on.
1932165 ALLEGRO_EDITOR EDIT_ETCH Arc slide behavior with clines at odd angles: notches on slides
1943901 ALLEGRO_EDITOR EDIT_ETCH arc segment incorrect on slide.
2031055 ALLEGRO_EDITOR EDIT_ETCH On drawing cline the width on a Layer is larger than defined constraint
1877891 ALLEGRO_EDITOR GRAPHICS Allegro PCB Editor crashes when started from EDM for projects without a board file or empty master.tag file
2040689 ALLEGRO_EDITOR NC The decimal digits of a rotated oval padstack do not match the Drill Chart.
2028105 ALLEGRO_EDITOR PLACEMENT Delay in moving a large count pin symbol
2019027 ALLEGRO_EDITOR REPORTS Information shown in the Report Viewer is not correct.
2022461 ALLEGRO_EDITOR SHAPE Abnormal termination of thieving function in Allegro PCB Editor
2032048 ALLEGRO_EDITOR SHAPE shape void difference from hotfix 026 to 048: need square corners for full round
2040138 ALLEGRO_EDITOR SHAPE shape_rki_autoclip affects the overlapping shape boundary
2040259 ALLEGRO_EDITOR SHAPE Same net shape and cline adds shape void around cline
2031468 ALLEGRO_EDITOR TECHFILE Cross section import (.tcfx) not working correctly.
2006425 ALLEGRO_EDITOR UI_FORMS Option to disable 'Create a New Design' window in OrCAD PCB Designer
2007451 ALLEGRO_EDITOR UI_FORMS Option to suppress 'Create a New Design" window for File > Open in OrCAD PCB Editor from hotfix 048
2009314 ALLEGRO_EDITOR UI_FORMS Existing scripts that open OrCAD PCB Editor not working in hotfix 048
2021476 ALLEGRO_EDITOR UI_FORMS PCB Editor is slow when using the command 'add connect'
2039462 ALLEGRO_EDITOR UI_FORMS Hovering over Default symbol height in Design Parameter Editor does not display a description
1808054 ALLEGRO_EDITOR UI_GENERAL Illegal value in axlFormSetField crashes PCB Editor
1822679 ALLEGRO_EDITOR UI_GENERAL 'Symbol pin #' field is truncated on rotating components in the Placement Edit mode
1856438 ALLEGRO_EDITOR UI_GENERAL Script recording messages not displayed in the PCB Editor task bar when using the script window.
1879078 ALLEGRO_EDITOR UI_GENERAL Running PCB Editor from command prompt with '-product help' should list all products and options
1944225 ALLEGRO_EDITOR UI_GENERAL Cannot close log file window till we close report dialog box
1967708 ALLEGRO_EDITOR UI_GENERAL New Command Window Shows Last Command in UI
1968380 ALLEGRO_EDITOR UI_GENERAL Write all open editing sessions in MRU
1982138 ALLEGRO_EDITOR UI_GENERAL axlFormListDeleteItem(fw field -1) not deleting last item of a list
2003054 ALLEGRO_EDITOR UI_GENERAL Grids not shown when 'nolast_file' is set
2010760 ALLEGRO_EDITOR UI_GENERAL Pressing tabs is selecting only vias and not selecting clines in PCB Editor in hotfix 048
2019120 ALLEGRO_EDITOR UI_GENERAL Tab key is not working when there are two objects on top of each other
2029248 ALLEGRO_EDITOR UI_GENERAL Colorview load is not working when using absolute path
2030985 ALLEGRO_EDITOR UI_GENERAL The view of the PCB is offset after closing and opening the board.
2037968 ALLEGRO_EDITOR UI_GENERAL Tab key will not cycle between cline elements.
2015766 ALLEGRO_PROD_TOOLB CORE Advanced Testpoint Check does not work
2023356 ALLEGRO_PROD_TOOLB CORE Edit new session does not work in quick symbol editor tool box
2017162 CAPTURE CONSTRAINT_MG Cannot apply ECSets in Constraint Manager-enabled Capture
2026777 CAPTURE CONSTRAINT_MG Cannot apply electrical CSet (ECSet) in Constraint Manager-enabled Design Entry CIS
2027545 CAPTURE CONSTRAINT_MG Getting error (ORCAP-40320) while creating ECSet
2012967 CAPTURE OTHER Capture license is loaded slowly in hotfix 048
2010093 CONCEPT_HDL ARCHIVER Archive .zip file keeps the whole folder hierarchy and not only the project hierarchy
2040431 CONCEPT_HDL EDIF300 EDIF300, Schematic Writer, crashes in release 17.2-2016
2034077 SIP_LAYOUT DFA DRC is not catching all Shape minimum width violations
2034094 SIP_LAYOUT DIE_ABSTRACT_ [VSDP-RDL Exchange] some traces are lost in SiP Layout
2037462 SIP_LAYOUT DIE_ABSTRACT_ Cline Segments are lost on saving and re-opening the design in next session
2025321 SIP_LAYOUT IMPORT_DATA compose symbol from geometry defaults need to change due to performance
2017759 SIP_LAYOUT PLACEMENT Placing a die creates extra place bound and puts pin numbers in the wrong place, causing future netlist import failure
2021057 SIP_LAYOUT SHAPE Polybool assert error when adding dynamic shape prevents shape voiding.
2012381 SIP_LAYOUT SKILL Ability to check if the Dynamic Unused Pads Suppression box is selected using SKILL
1990299 SIP_LAYOUT UI_GENERAL Pressing 'Esc' cancels DRC checking when there is no focus on the Allegro PCB Editor canvas
1997317 SIP_LAYOUT WLP Advanced WLP, Metal Density Scan does not correctly calculate scan region count in Y direction
2029524 SPECCTRA ROUTE SPECCTRA stops responding when executing the quit command
1670888 SYSTEM_CAPTURE CANVAS_EDIT Rotation error when connected to a power symbol
1880809 SYSTEM_CAPTURE CANVAS_EDIT Can modify only one RefDes from canvas for duplicate RefDes; can modify both from the Properties window
1979063 SYSTEM_CAPTURE CANVAS_EDIT System Capture : File > Close is grayed out
2034498 SYSTEM_CAPTURE CAPTURE_IMPOR Cannot find parts via Find & Replace after importing Capture design
1984561 SYSTEM_CAPTURE CROSSPROBE System Capture: Cross-probing from layout does not work when zoomed into a specific area on canvas
1863460 SYSTEM_CAPTURE DARK_THEME thumbnail preview of pages is in light them but dragging the page the previes is dark
2025876 SYSTEM_CAPTURE EDIT_OPERATIO Route failures when dragging a circuit
2005904 SYSTEM_CAPTURE FORMAT_OBJECT Pin name text is smaller in System Capture than in DE-HDL by about 25%
2036782 SYSTEM_CAPTURE IMPORT_BLOCK Unable to import the block from project.
2025949 SYSTEM_CAPTURE IMPORT_DEHDL_Title block and thick wires/lines of border in DE-HDL do not translate in System Capture
2025950 SYSTEM_CAPTURE IMPORT_DEHDL_Broken connectivity on imported ground symbols
2040923 SYSTEM_CAPTURE MISCELLANEOUS System Capture -Multiple Symbol Replace, disconnects and changes orientation
2017526 SYSTEM_CAPTURE NAVLINKS Page information missing in NAVLINKS
2015346 SYSTEM_CAPTURE PAGE_MANAGEME Rename page fails in some cases
2038811 SYSTEM_CAPTURE PRINT Black & White PDF showing colors
2048493 SYSTEM_CAPTURE SYMBOL_GEN Symbol Editor, Modify outline adds an 'X' in symbol incorrectly
2031995 SYSTEM_CAPTURE VARIANT_MANAG Variant Editor does not load the design and restarts the machine after sometime.
2032005 SYSTEM_CAPTURE VARIANT_MANAG Custom variables not saved for variants
1968431 SYSTEM_CAPTURE WORKSPACE Unable to reorder the pages (tabs) when opened in the workspace
2040995 XTRACTIM GUI Running XIM from APD enables "skip DC R simulation" by mistake
DOWNLOAD LINKS :
Kod:
https://rapidgator.net/file/d72060d71b7c71f85b6cd6b82ff15fdd/SPB.17.20.052.part1.rar.html
https://rapidgator.net/file/dba6e57b20e069d13d6d08882adeb855/SPB.17.20.052.part2.rar.html
https://rapidgator.net/file/218fc560e40746ef9837317ce1a41d23/SPB.17.20.052.part3.rar.html
https://rapidgator.net/file/6bcffcdab78441ac5634b596d2f17073/SPB.17.20.052.part4.rar.html
http://nitroflare.com/view/0D756B5284B9272/SPB.17.20.052.part1.rar
http://nitroflare.com/view/5F85ED9601AE694/SPB.17.20.052.part2.rar
http://nitroflare.com/view/5D5D9BE2DD789FC/SPB.17.20.052.part3.rar
http://nitroflare.com/view/05B788BCB3D60F3/SPB.17.20.052.part4.rar
https://uploadgig.com/file/download/59213C016ae5c498/SPB.17.20.052.part1.rar
https://uploadgig.com/file/download/e1b218015a8591E7/SPB.17.20.052.part2.rar
https://uploadgig.com/file/download/Cfae10f2Bb6De6a8/SPB.17.20.052.part3.rar
https://uploadgig.com/file/download/f897c0D352465566/SPB.17.20.052.part4.rar
