2 sonuçtan 1 ile 2 arası
  1. #1
    Üye missyou - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    20.08.2016
    Mesajlar
    135.920
    Konular
    0
    Bölümü
    Bilgisayar
    Cinsiyet
    Kadın
    Tecrübe Puanı
    143

    Bascom-AVR version 2.0.8.1



    Bascom-AVR version 2.0.8.1 | 51.3 mb
    MCS Electronics has unveiled BASCOM-AVR version 2.0.8.1, is the original Windows BASIC COMPILER for the AVR family. The most important changes since 2.0.8.0: - CONTINUE statement added - REDO statement added - NOP is now also a BASCOM BASIC statement.

    The most important changes in BASCOM-AVR version 2.0.8.1:

    - CONTINUE statement added
    - REDO statement added
    - NOP is now also a BASCOM BASIC statement
    - The editor supports jump to implementation : hold CTRL key and hover the mouse over an identifier. When it becomes underlined and blue you can click it with the left mouse key.
    Use CTRL+BACKSPACE to jump back
    - when defining a constant named Updateeprom , the eeprom will be updated. which means that the value will only be written when it differs
    - config timer1 for tiny 25/45/85 set the wrong register bits.
    - the watchdog is disabled as part of the init procedure. it is now disabled BEFORE the optional call to init_micro and not after as in 2079.
    - passing string constants with embedded {034} resulted in an extra (unwanted) space.
    - accessing passed string array in sub without length info, but with constant index failed.
    - crcmb funtion added to help. (checksum for modbus)
    - for xmega i2cstop you can define a constant named _TWI_STOP_1 or _TWI_STOP_2 to change the behavior.
    - makemodbus() function 1, 2 and 4 added to modbus.lib
    - support for xmega added to getrc
    - PDF download now also checks/download the BASCOM-AVR manual
    - PRINTBIN did not accept a constant for the optional channel : printbin #someconst. Fixed.
    - update from within the application simplified. see help.
    - printbin raised error while printing multiple variables
    - simulator did not show proper hex value for single variables.
    - fusing which uses ftoa uses a table which could be loaded on a page boundary. this could lead to rampz problems. fixed.
    - crc8UNI added for normal crc8 CCITT
    - config clock additional option : highESR=1 to enable high ESR mode in xmega with 32 bit RTC
    - FM24C64_256-XMEGA.lib added for xmega. read the lib notes.
    - tcpip-w5500.lbx has been updated to support usage from boot space. See $loader
    - stk500 board. osc can be set from menu
    - using spimove() inside a sub with a parameter for the count, would load the wrong data.
    - i2cwbyte would raise an error if a multi dim array was used.
    - get/put/seek in AVR-DOS used in combination with $bigstrings would fail for numeric data
    - xmega i2cstop has two new optional mode. See help.
    - CONFIG SPI has a new option : EXTENDED=1 to have extended data size reading/writing.
    - support for rgbW leds added (ws2812 with extra white led)
    - CONFIG USI has a new option ALTPIN to support optional pins.
    - xmega dat file fuse tables corrected.




    About Bascom-AVR. BASCOM and AVR microcontrollers - it's an unbeatable team! Whatever you want to develop, in most cases the ATmega has everything you need on board. Ports, timers, A/D converters, PWM outputs and serial interfaces, RAM, flash ROM and EEPROM: everything is in plentiful supply, and with BASCOM their use is child's play. More challenging peripherals like LCDs, RC5 and I2C can be used as well with just a handful of instructions. A wide hardware platform is available, too. Whether you're using Atmel's STK500 kit, the Elektor ATM18 or your own board, you can instantly turn the examples from this book into practice. For less exacting tasks controllers from the ATtiny are series used. That way, you can realize your own projects quickly and with little expense.

    About MCS Electronics. MCS Electronics specializes in developing Windows BASIC compilers and embedded systems. The MCS Electronics product line include BASCOM Windows BASIC compilers for Atmel AVR microprocessors

    Product: Bascom-AVR
    Version: 2.0.8.1*
    Supported Architectures: x86
    Website Home Page :
    Kod:
    http://www.mcselec.com
    Language: multilanguage
    System Requirements: PC
    Supported Operating Systems: Windows 2000 and above
    Size: 51.3 mb

    Download link:
    Kod:
    nitroflare_com: http://nitroflare.com/view/A7C6C8A207012E3/ks42p.BascomAVR.version.2.0.8.1.rar rapidgator_net: https://rapidgator.net/file/6028fb056294aefe0395b5b6888bf1bf/ks42p.BascomAVR.version.2.0.8.1.rar.html
    Links are Interchangeable - No Password - Single Extraction

  2. #2
    Üye thzfsdhdty - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    13.06.2018
    Yaş
    39
    Mesajlar
    2.223
    Konular
    0
    Bölümü
    Uzay
    Cinsiyet
    Kadın
    Tecrübe Puanı
    8

    Cevap: Bascom-AVR version 2.0.8.1

    NhÃ* má»›i xây bên Ä‘Æ°á»ng TL41, khu phố 1, PhÆ°á»ng Thạnh Lá»™c, Quáº*n 12, HCM
    Diện tÃ*ch 72m2
    Giá 3 tỷ 250 triệu
    Liên hệ chÃ*nh chủ 0124 868 5584

    Clip + hình ảnh: [Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]

 

 

Konu Bilgileri

Users Browsing this Thread

Şu an 1 kullanıcı var. (0 üye ve 1 konuk)

Konuyu Favori Sayfanıza Ekleyin

Konuyu Favori Sayfanıza Ekleyin

Yetkileriniz

  • Konu Acma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok
  •