Antenna Magus Professional v9.1.0 (x64) 2019.1

Antenna Magus Professional v9.1.0 (x64) 2019.1
x64 | Language:English | File Size: 1.44 GB

Antenna Magus is one of the best and most powerful software available for the calculation of the antenna design. To design and build an antenna needs to have knowledge in the field of emissions, strengthen the principles of microwave radiation and microwave amplifier design, impedance matching of the software Antenna Magus will do it the best possible way. In this application.

the user can easily antennas its requirements from the antenna in database software, numbering more than 200 number, select the configuration that meets your needs, given it a soft one microwave circuit simulation and design software such as CTS or AWR or FIKO to simulate and analyze send.

Facilities and features Antenna Magus Professional:
Antenna Magus Explore:
Find your favorite model in the database software and open it. Search the model can be based on different parameters such as the type of antenna, antenna manufacturer and done. Explore the useful information for all models, including explanatory, standard references used to develop the model, a short description of how the model is inserted.

Antenna Magus Design:
Software design and application of environment-friendly Antenna Magus is quite regular and quite similar to other commercial software is in the field of antenna design. In this environment the user may be required antenna on the basis of different parameters such as frequency, gain, input impedance and design. In the design, antenna design software and its parameters according to Czech law, and if the values entered by the user or other design parameters do not comply with the rules of the application, the relevant error is displayed to the user.

Antenna Magus Estimate Performance:
In this section, the user can use the three-dimensional simulation of electromagnetic software, antennas designed to simulate and graphs of frequency response, impedance of the antenna according to the input frequency and for antenna design view and errors and design flaws fix.

Antenna Magus Export:
Software Antenna Magus is now three software FEKO and CST MICROWAVE STUDIO and AWR Design Environment supports. In this application the user can model the antenna along with other parts of its orbit, such as amplifiers, converters, mixers used to simulate all system components

System Requirements:
OS:Windows VISTA Business,Windows 7 supporting Service pack 1,Windows 8 Windows 8.1,Windows 10 orWindows Server 2008/2012.

Installation guide:
To use this software, you must first version of the software CST STUDIO SUITE installed and enabled, then install AntennaMagus. All services related to the CST software from the Services tool or using the Windows Task Manager and License Manager Stop CST.

Then Patch file executable in the folder Crack in the installation program copy and Run as administrtor run and wait for the Patch complete and close the window, but an error message that the file Patch, the process of crack should be without error and for the rest of the files patched message is displayed.

All files in the folder Crack license to run Notepad and enter your first line instead of the specified computer name and save the file. Finally, run CST License Manager from the Start menu and click the Start Service.

Antenna Magus Professional v9.1.0 2019.1 Release Notes:

New Antennas, Tools, Libraries and Extensions:
-The Series-fed 3 by 3 Rectangular Patch Array. [MAGUS-26083]
-The Printed Multilayer Dipole Array. [MAGUS-26567]
-The Stacked Square-Ring Pin-Fed Patch Antenna. [MAGUS-26941]
-Toolbox calculators for transmission lines. [MAGUS-26749]
-The UFL Connector. [MAGUS-26915]
-Multilayer keyword has been added to allow searching for antennas with more than one dielectric. [MAGUS-26768]

New Features, Extensions and Improvements:
-Information document for array operators are now scrollable using the mouse wheel. [MAGUS-26823]
-Default values are now shown immidiately when adding array operators. [MAGUS-26836]
-Capacitance, Inductance-per-meter and radians have been added as supported unit types. [MAGUS-26986]

Bug Fixes:
-An error in the indication of Hd in the right side view of the Dielectric-loaded folded half-loop has been fixed. [AMB-2892]
-The bounding box for the Offset pattern-fed Gregorian reflector antenna was incorrect for some parameters sets. This has been fixed. [AMB-2897]
-The data for the phi=0 cut in the zoomed 2D Farfield chart of Offset pattern-fed Cassegrain reflector antenna was too wide for the intended graph. This has been fixed. [AMB-2903]
-Messages for applied array operators now show with mouse hover. [MAGUS-26837]
-If an Array Operator could not be applied the relevant messages weren't displayed. This has been fixed. [AMB-2857]
-Objectives that weren't used by Antenna Magus for a design are now indicated as 'Not Used'. [AMB-1210]
-In Find Mode, the display ordering of the matched keywords has been improved. [AMB-1239]
-Keyword hint text from Find Mode was visible on the Start Page. This has been fixed. [AMB-2607]
-The Axis of a 3D preview were partially hidden at certain rotations. This has been fixed. [AMB-2762]
-The spacing between images and their captions have been adjusted to improve readabiliy in Articles. [AMB-2852]
-In some cases if the trace visibility was disabled for a design, the trace remained visible even if another design was selected. This has been fixed. [AMB-2804]
-When changing from an enabled specification to disabling the specification in design mode a crash occured if the the reference design was the last design to be deleted. [AMB-2879]
-Substrates showed a warning regarding DRE(Design Range Extrapolation) even though substrates do not have extrapolation ranges. This has been fixed. [AMB-2880]
-Element patterns were not correctly applied to editable arrays. This has been fixed. [AMB-2896]
-The Export Distribution Matrix (Wavelength) button did not activate correctly. This has been fixed. [AMB-2899]
-Model Preview Format Tab was not selectable in certain cases. This has been fixed. [AMB-2860]
-Generating a CST model from an empty model in Custom templates caused errors when opening the model in CST 2019. This has been fixed. [AMB-2911]
-History tree in the CST export model of the MbyN patch array failed. This has been fixed. [CST-54284]
-Some devices had issues where the 3D Preview never updated or performance estimation never finished. This has been fixed. [AMB-2913]
-In some cases, Performance estimation of the Pattern-fed cassegrain reflector antenna may have failed to show 3D far-field results. This has been fixed. [CST-56274]
-In some cases the exported Near Field Source (NFS) was incorrect due to an internal error in its bounding box position. This has been fixed.

[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]