Acon Digital Equalize 2.0.29
Acon Digital Equalize is a parametric equalizer plug-in that combines unique features with excellent workflow and an intuitive user interface. Unlike other equalizers, you can freely adjust not only center frequency, gain and bandwidths, but also the filter slope for each band. The filter slope can be set anywhere from 3 dB to ultra-sharp 120 dB per octave.
Needless to say, you can operate Equalize as a zero latency plug-in when using the minimum phase mode or choose to preserve the phase relationships in the linear phase mode. Equalize goes one step further, though, and introduces the unique mixed phase mode that allows you to set the latency freely in the range 5 to 120 milliseconds while preserving the phase relationships as far as possible. That gives a unique control over potential pre-ringing artifacts which is a common problem with linear phase filtering. Latency values below 20 milliseconds ensure that any pre-ringing is masked by the temporal masking of the human hearing while preserving the time-alignment across the audible frequency range.
Great care has been taken to provide a user interface that is straight forward to use. Band parameters can be adjusted using handles directly in the graphical representation of the frequency response, including bandwidths and filter slopes. A flexible real-time analyzer lets you monitor every aspect of the processing. You can easily switch between full, mid, side, left or right channel processing for each band and Equalize automatically routes the audio signal internally to ensure the best results and lowest possible latency.
Highlights
Eight different band filter types - low cut, low shelf, peak, tilt, bandpass, notch, high shelf and high cut
Up to twelve independent bands
Freely adjustable gain, frequency, bandwidth, resonance and filter slope
Three different phase modes, including the novel mixed phase mode with adjustable latency
Choose channel mode for each band independently (mid, side, left, right or full processing)
Platforms and Plug-in Formats
Available as VST, VST3 or AAX plug-ins on PC (Windows)
Available as VST, VST3, AAX or AU plug-ins on Apple Macintosh (OS X)
Native 32 bit or 64 bit versions of all plug-ins are available
Supports sampling rates up to 96 kHz
Supports multi-channel formats such as 5.1 and 7.1 surround
Acon Digital Equalize
Up to twelve equalizer bands
Eight different band filter types (low cut, low shelf, peak, tilt, bandpass, notch, high shelf and high cut)
Band frequency, gain, bandwidth, resonance and filter slope is freely adjustable for each band
Three different filter modes, minimum phase, linear phase or the novel mixed phase
Adjustable latency and pre-ringing time in mixed phase mode
Zero latency in minimum phase mode
Channel mode (mid, side, left, right or full processing) can be set independently for each band
Multiple selection of bands
Resizable graphical user interface
Solo and bypass modes
Optional automatic make-up gain
Optional gain to bandwidth linking
Two spectrum analyzers that can analyze the input or output signal from the mid, side, left or right channel
Graphical visualization of the equalizer frequency response
Preset manager and a large number of factory presets
Save, load and categorize user presets
System requirements:
A Pentium IV or higher
Minimum 256 MB RAM (1 GB recommended)
Windows 10, 8 or 7
A host application that is compatible with VST, VST3 or AAX (Pro Tools 10.3.5 or higher)
Home Page -
Kod:
https://acondigital.com/]https://acondigital.com/
Download link:
Kod:
rapidgator_net:
https://rapidgator.net/file/8a9a932663d266af537f455675245d99/jbi0g.Acon.Digital.Equalize.2.0.29.rar.html
nitroflare_com:
https://nitroflare.com/view/C38AAF23BA2C15E/jbi0g.Acon.Digital.Equalize.2.0.29.rar
Links are Interchangeable - No Password - Single Extraction
