Network Interface Layer and Ethernet Operation for Cisco CCNA.200-125100-105 (2016)
[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]
Network Interface Layer and Ethernet Operation for Cisco CCNA 200-125/100-105 (2016)
August 2016 | MP4 | Video: AVC 1280x720 | Audio: AAC 44KHz 2ch | Duration: 3 Hours | 435 MB
Genre: eLearning | Language: English
Since Ethernet is a widely used protocol in data networking, you'll spend most of the course examining Ethernet. You'll also examine physical components required for networking, as well as the layer 2 protocols used in network communication.
Get a better understanding on how Ethernet operates and how to configure a Cisco switch. In this course, Network Interface Layer and Ethernet Operation for Cisco CCNA 200-125/100-105, you'll learn some network interface layer protocols but focus your attention on Ethernet and Ethernet switching. First, you'll learn the details of the types of cabling, fiber optics, and wireless technology used in data link layer protocols to move information. Then, you'll examine a variety of data link layer protocols and where they are used. You'll also look at the long history of Ethernet, and then examine the Ethernet frame header, the Ethernet Switch, and how a layer 2 broadcast message propagates through the network. Lastly, you'll see a detailed demonstration of a switch configuration as well as an examination of the behavior of hubs and switches in the same network, and what the MAC address table looks like on a series of switches connected together. By the end of this course, you'll have an in-depth understanding of Ethernet and how to configure a Cisco switch.
Download link:
Links are Interchangeable - No Password - Single Extraction
