Introduction to the ESP8266 and the IoT Training Video
2016-08-30 | SKU: 02408 | .MP4, AVC, 2250 kbps, 1920x1080 | English, AAC, 128 kbps, 2 Ch | 2.5 hours | 2.33 GB
Instructor: John C Shovic
This course demonstrates how to design, build and deploy WiFI connected IoT devices. It introduces you to a low cost ESP8266 IoT computer, shows you how to configure the ESP8266 using the Arduino IDE (integrated development environment), explains the Grove "no-soldering-required" prototyping system, and leads you through two start-to-finish IoT projects.

Designed for learners with a very basic understanding of programming, electronic components (resistors, switches, etc.), and the interconnection between servers and browsers, this course requires the following IoT hardware and software: Arduino IDE, ESP8266 SDK, the Adafruit Huzzah, an FTDI Cable, and a set of Grove prototyping devices. Each requirement is explained at the beginning of the course.

* Gain a fundamental understanding of the Internet of Things-the IoT

* Build two working IoT prototypes using off the shelf components

* Learn to set up, configure, and program an ESP8266 IoT computer using the Arduino IDE

* Understand how to build an IoT web server

* Practice creating complex IoT devices using the Grove "no-soldering" prototyping system

* Learn to use the IOT messaging protocol (MQTT) with the Raspberry Pi and the Adafruit.io platforms

Download link:




uploaded_net:
[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]

bigfile_to:
[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]
Links are Interchangeable - No Password - Single Extraction